In skating, Double Push refers to a technique in which the skater swings their body against a gliding skate, first using its outside edge and then, by leaning in the opposite direction, swiveling the same skate onto its inside edge. This allows the skater to get two “pushes” from a single gliding skate, hence the name of the move.
Most learners have a hard time spotting the “second push” when watching YouTube tutorials. To the eye, each gliding skate appears to follow an outward trajectory, eventually ending in what looks like a regular skating stride. Track the left skate in the following image, from the moment it is set down on the pavement to the point where it strides outward at the end of the sequence. That outward stride is usually the only “push” a first-timer sees.
This short article explores this technique from my own perspective. Along the way, I’ll explain why I think of it as a “Double Swing”, with two body swings in each of the two gliding phases. This led me to discover similarities between Double Push and Linear Crossover, which in turn led me to rethink the technique not in terms of pushing, but as a “Two Swings” movement.

Double Push, or Double Swing?
I annotated the earlier Double Push filmstrip image with labels to show where the two pushes happen.
The first, obvious push is marked in red, seen at the right side of this sequence. The skater swings his upper body rightward, using the inside edge of his left gliding skate as an anchor. This is typically described as a regular skating stride, or an inside-edge push. But I prefer to think of it as the result of the body lunging to the right, or an inside-edge lunge, as indicated by the orange line.

The second, less obvious push is marked in blue, at the start of this sequence. The skater swings his upper body leftward, using the outside edge of the same left gliding skate as an anchor. This is typically described as a push similar to an under-push in a crossover, or an outside-edge push. Again, I prefer to think of the push as a consequence of the body lunging to the left, or an outside-edge lunge.
Double Push, or Pretend Linear Crossover?
In fact, if you look carefully at the right free skate, you will find that it makes a pretend-crossover behind the gliding skate. This crossover-like movement helps swing the body leftward. This lunge is uncannily similar to the outside-edge lunge in a crossover.

Previous discussions (here, here, and here) with u/Budget_Ambassador_29 and u/ThePontiff_Verified on r/rollerblading and r/Speedskating revealed a shared outside-edge push in these skating techniques.
I also discovered that Linear Crossover looks remarkably similar to Double Push when viewed from the perspectives of body lunging and the main gliding skate in Double Push.
To make the resemblance easier to see, I compiled a filmstrip of Linear Crossover and stacked the corresponding Double Push sequence directly above it. See for yourself.

Instead of tracking the main gliding skate, the left skate, you can also track the right skate, which is the free skate in Double Push. As I mentioned earlier, this free skate makes a fake crossover behind the gliding skate, but stops short of actually planting itself on the pavement. It is then swung around to the front and finally put down on its outside edge at the end of the Double Push sequence.
I marked the right skate in green in both Double Push and Linear Crossover, and stacked the two filmstrips together to help you see the resemblance between these two moves from the perspective of the right skate.

In Linear Crossover, the right skate is actually planted on the pavement, providing support for an additional body lunge towards the skater’s left. This extra lunge is missing in Double Push.
Double Push Tutorials
I recommend the following YouTube tutorials for learning the Double Push. Keep my observations above in mind as you watch them. Some of my ideas may help you get more out of these tutorials, even though not all of them explain the drills or the Double Push itself in terms of body lunging, pretend crossovers, and outside edges.
- Double Push in Slow-motion, featuring Mark Horsten: this is the source video from which I created filmstrips you studied earlier. Normal-speed playback followed by a slow-motion version.
- Double Push Tutorial by Joey Mantia: clearly explains two “compressions” of wheels corresponding to the two body lunges I described earlier. Whenever you hear Joey say “compression”, just think “lunge body against those wheels as an anchor”.
- Double Push tutorial with drill moves by Nikolay Mushkov
- Joey Mantia skating Double Push in super-slow motion
- Double Push for Dummies by Viktor Thorup
- Comparison of “Single” Push to Double Push by Viktor Thorup: a short
- Pascal Briand on the theory of Double Push: draws skating figures on a piece of paper to analyze not only trajectory, but more importantly how your skate must be oriented as inferred by a fluid trajectory. Accompanied by slow-motion clips.
- Eddy Matzger teaching Double Push featuring Barry Publow: Part 1, Part 2, Anther one
- Elements of Chad Hedrick Double Push, by P. J. Baum
- Linear Crossover in slow motion on hockey skates by Evolution Hockey: this is the source video from which I created the Linear Crossover filmstrips you studied earlier. Narration, normal-speed playback, followed by a slow-motion version.
Double-Swing Cycles, Glides, and Body Swings
I will use the term double-push “stroke” to refer to the continuous movement of a gliding skate as it performs an outside-edge push followed by an inside-edge push. Each double-push “cycle” consists of one left-skate stroke followed by one right-skate stroke.
The following images show these two strokes, which together constitute one complete cycle. Follow the skater through the left-skate stroke, from the left side to the right side of the image, and then through the right-skate stroke, from the right side back to the left.


In the above images, I also labeled two “body swings” corresponding to the outside-edge push (i.e. under-push) and inside-edge push (i.e. traditional push). As the title of this essay suggests, I believe it may be even more appropriate to describe this skating technique as “Double Swing.” In this terminology, each double-swing “cycle” consists of a single-skate “glide” with two “body swings”.
Images Showing Complete Cycles
The following images use a yellow line to mark the straight line formed by the shin, boot, frame, and wheels, making it easier to see how the wheels are angled at different stages of a double-push stroke. Blue and red circles, with varying degrees of color saturation, indicate the strength of the outside and inside edges, respectively.
These annotations allow you to observe how the skater changes body lean to transition from an outside edge, through a neutral, centered position, and finally to an inside edge, all within a single stroke.


I added images of Linear Crossover discussed earlier to the above images, so you can compare the full Double Push cycle to a full Linear Crossover cycle.


The following images illustrate the function of the free skates in Double Push. As discussed earlier, they perform fake crossover moves to help generate body lunges. Once again, I stacked a Double Push filmstrip on top of a Linear Crossover one to help you see the resemblance between the two moves.


Reframing as Simply “Two Swings”
There is an even better way to describe this skating technique. I call it the “Two Swings”. This may sound similar to “Double Swing”, which I introduced earlier, but it represents a very different way of looking at the technique.
Start by examining the two Double Push (or Double Swing) filmstrips from earlier. I have connected the two strokes into one big cycle and drawn a large white circular line to indicate how the cycle can repeat indefinitely.
These filmstrips were stitched together primarily to track the left gliding skate in the top strip and the right gliding skate in the bottom strip. Although the two strips illustrate changes in body lean (or what I call swings), the directions of these body swings are not always depicted in the most intuitive way.

For instance, the skater figures marked with magenta lines indicate a leftward body swing, while those marked with green lines indicate a rightward body swing. However, if you follow these figures in the direction of the large white circular line, you will find that the skater leans leftward at first in the top strip, moving with the direction of the white line, but soon begins to lean rightward, against its direction.
The following image rearranges figures of the skater such that all figures in the process of swinging from the right to the left are collected in the top filmstrip, and shown in sequence following the direction of the white circular line. Similarly, rightward-swinging figures are collected in the bottom strip, and again shown in accordance with the circular line’s direction.

Here is the top reframed strip. I call this sequence the Leftward Swing.
The skater starts this sequence already leaning aggressively to the right, while gliding equally aggressively on the outside edge of the right skate. This is not a sustainable posture for long, as the skater is about to fall to the right.
During the first half of the strip, note how the skater swings both arms leftward while simultaneously swinging the pseudo-crossed left skate leftward and forward. This creates a body lunge to the left, quickly pivoting the gliding right skate from its outside edge onto its inside edge. The second half of the strip shows the left skate being planted on the pavement to become the next gliding skate, while the right skate completes a traditional rightward stride, or what I call an inside-edge push.

Colored circles indicate degrees of outside edgeness (blue) and inside edgeness (red)
But the sequence doesn’t end there. Note that, for a brief moment, both skates are gliding. As the stride finishes, the right skate pivots progressively further onto its inside edge until it becomes airborne. Meanwhile, the left skate starts on a neutral edge and turns progressively further onto its outside edge, as the skater continues lunging to the left, even beyond the completion of the stride.
This is where the magic of the outside-edge push happens. Without the continued leftward lunge, such a push cannot be achieved. As explained earlier, this lunge is further assisted by a fake crossover move performed by the right skate, which has now become the free skate. In addition, both arms have now swung completely to the left to add to this body lunge.
Now let’s examine the bottom strip, showing the sequence I call the Rightward Swing. It is an exact mirror image of the Leftward Swing.
So, the skater starts this sequence already leaning aggressively to the left, with his entire body positioned to the left of the gliding skate. He is therefore about to fall to the left. Again, the skater swings both arms and the free skate toward the opposite side, this time rightward. Using the left gliding skate as an anchor, he lunges to the right, and in the process pivots the gliding skate onto its inside edge for a powerful inside-edge push.
And again, the sequence continues beyond the completion of the leftward stride. The right skate now becomes the gliding skate and serves as an anchor for further body leaning to the right, generating an effective outside-edge push.

Colored circles indicate degrees of outside edgeness (blue) and inside edgeness (red)
Additional Images

—

—

Last edited: 2026-11-18

